The Sellar ProblemΒΆ

We will cover some of the more advanced capabilities of OpenMDAO. You should read and understand Simple Optimization and MetaModel before starting this one.

This tutorial illustrates the features of OpenMDAO that support the use of decomposition-based MDAO architectures, such as:

  1. Multidisciplinary Design Feasible (MDF)
  2. Independent Design Feasible (IDF)
  3. Collaborative Optimization (CO)

First we’ll walk through the manual implementation of these architectures on a simple example problem. This will introduce you to using iteration hierarchy, metamodeling, and Design of Experiments (DOE) to construct different kinds of optimization processes. Understanding this section is important if you want to implement a new MDAO architecture or an existing one that is not currently available within OpenMDAO.

Once you understand how to construct an MDAO architecture by hand, you’ll see that it can take a good amount of work to set up. That’s why we’ll show you how to set up your problem so you can automatically apply a number of different MDAO architectures. Using the automatic implementation of an architecture will dramatically simplify your input files.

All of these tutorials use the Sellar Problem, which consists of two disciplines as follows:

Equations showing the two disciplines for the Sellar problem

Variables z1, z2, and x1 are the design variables over which we’d like to minimize the objective. Both disciplines are functions of z1 and z2, so they are called the global design variables, while only the first discipline is a function of x1, so it is called the local design variable. The two disciplines are coupled by the coupling variables y1 and y2. Discipline 1 takes y2 as an input, and computes y1 as an output, while Discipline 2 takes y1 as an input and computes y2 as an output. As such, the two disciplines depend on each other’s output, so iteration is required to find a set of coupling variables that satisfies both equations.

Disciplines 1 and 2 were implemented in OpenMDAO as components.

from openmdao.main.api import Component
from openmdao.lib.datatypes.api import Float


class Discipline1(Component):
    """Component containing Discipline 1"""

    # pylint: disable-msg=E1101
    z1 = Float(0.0, iotype='in', desc='Global Design Variable')
    z2 = Float(0.0, iotype='in', desc='Global Design Variable')
    x1 = Float(0.0, iotype='in', desc='Local Design Variable')
    y2 = Float(0.0, iotype='in', desc='Disciplinary Coupling')

    y1 = Float(iotype='out', desc='Output of this Discipline')


    def execute(self):
        """Evaluates the equation
        y1 = z1**2 + z2 + x1 - 0.2*y2"""

        z1 = self.z1
        z2 = self.z2
        x1 = self.x1
        y2 = self.y2

        self.y1 = z1**2 + z2 + x1 - 0.2*y2



class Discipline2(Component):
    """Component containing Discipline 2"""

    # pylint: disable-msg=E1101
    z1 = Float(0.0, iotype='in', desc='Global Design Variable')
    z2 = Float(0.0, iotype='in', desc='Global Design Variable')
    y1 = Float(0.0, iotype='in', desc='Disciplinary Coupling')

    y2 = Float(iotype='out', desc='Output of this Discipline')


    def execute(self):
        """Evaluates the equation
        y1 = y1**(.5) + z1 + z2"""

        z1 = self.z1
        z2 = self.z2

        # Note: this may cause some issues. However, y1 is constrained to be
        # above 3.16, so lets just let it converge, and the optimizer will
        # throw it out
        y1 = abs(self.y1)

        self.y2 = y1**(.5) + z1 + z2

Discipline2 contains a square root of variable y1 in its calculation. For negative values of y1, the result would be imaginary, so the absolute value is taken before the square root is applied. This component is clearly not valid for y1 < 0, but some solvers could occasionally force y1 to go slightly negative while trying to converge the two disciplines . The inclusion of the absolute value solves the problem without impacting the final converged solution.

These two components are contained in the file sellar.py in the openmdao.lib.optproblems sub-package. This part of the standard library contains a number of common optimization problems which you can use to test your own optimization algorithms.

Now that you have defined the components for the Sellar Problem for yourself, let’s take a momement to consider what we have really accomplished. Firstly, we have written two (very simple) analysis components. If you were working on a real problem, these would likely come in the form of some much more complex tools that you wrapped in the framework. But keep in mind that from an optimization point of view, whether they are simple tools or wrappers for real analyses, OpenMDAO still views them as components with inputs, outputs, and an execute function.

We have talked about the problem formulation and specified that certain variables will be design variables, while others are coupling variables. But none of the code we have written has told OpenMDAO about those details. That’s what we’ll get to next!

Reference:

Sellar, R. S., Batill, S. M., and Renaud, J. E., “Response Surface Based, Concurrent Subspace Optimization for Multidisciplinary System Design,” Proceedings References 79 of the 34th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, January 1996.

OpenMDAO Home

Previous topic

MDAO Architectures

Next topic

Multidisciplinary Design Feasible (MDF)

This Page