Drivers

BroydenSolver

The BroydenSolver can be used to solve for the set of inputs (independents) that are needed to to make a model satisfy an equation (the dependent equation) that is a function of model outputs. BroydenSolver is based on the quasi-Newton-Raphson algorithms found in SciPy’s nonlinear solver library. As the name implies, a Broyden update is used to approximate the Jacobian matrix. In fact, no Jacobian is evaluated with these algorithms, so they are quicker than a full Newton solver, but they may not be suitable for all problems.

To see how to use the BroydenSolver, consider a problem where we’d like to solve for the intersection of a line and a parabola. We can implement this as a single component. (It is also possible to implement it as two components if you’d prefer. See Tutorial: MDAO Architectures to learn how to broadcast variables.)

from openmdao.lib.datatypes.api import Float
from openmdao.main.api import Component

class MIMOSystem(Component):
    """ Two equations, two unknowns """

    x = Float(10.0, iotype="in", doc="Input 1")
    y = Float(10.0, iotype="in", doc="Input 2")

    f_xy = Float(0.0, iotype="out", doc="Output 1")
    g_xy = Float(0.0, iotype="out", doc="Output 2")

    def execute(self):
        """ Evaluate:
        f_xy = 2.0*x**2 - y + 2.0
        g_xy = 2.0*x - y - 4.0
        """

        x = self.x
        y = self.y

        self.f_xy = 2.0*x**2 - y + 2.0
        self.g_xy = 2.0*x - y + 4.0

Notice that this is a two-input problem – the variables are x and y. There are also two equations that need to be satisfied: the equation for the line and the equation for the parabola. There are actually two solutions to this set of equations. The solver will return the first one that it finds. You can usually find other solutions by starting the solution from different initial points. We start at (10, 10), as designated by the default values for the variables x and y.

Next, we build a model that uses the BroydenSolver to find a root for the equations defined in MIMOSystem.

from openmdao.lib.drivers.api import BroydenSolver
from openmdao.main.api import Assembly

class SolutionAssembly(Assembly):
    """ Solves for the root of MIMOSystem. """

    def __init__(self):
        """ Creates a new Assembly with this problem
        root at (0,1)
        """

        super(SolutionAssembly, self).__init__()

        self.add('driver', BroydenSolver())
        self.add('problem', MIMOSystem())

        self.driver.workflow.add('problem')

        self.driver.add_parameter('problem.x', low=-1.0e99, high=1.0e99)
        self.driver.add_parameter('problem.y', low=-1.0e99, high=1.0e99)

        self.driver.add_constraint('problem.f_xy = 0.0')
        self.driver.add_constraint('problem.g_xy = 0.0')
        self.driver.itmax = 20
        self.driver.alpha = .4
        self.driver.tol = .000000001

The parameters are the independent variables that the solver is allowed to vary. The method add_parameter is used to define these. Broyden does not utilize the low and high arguments, so they are set to some large arbitrary negative and positive values.

The equations that we want to satisfy are added as equality constraints using the add_constraint method. We want to find x and y that satisfy f_xy=0 and g_xy=0, so these two equations are added to the solver.

Both the add_parameter and add_constraint methods are presented in more detail in Tutorial: MDAO Architectures.

The resulting solution should yield:

>>> top = SolutionAssembly()
>>> top.run()
>>> print top.problem.x, top.problem.y
1.61... 7.23...

Five parameters control the solution process in the BroydenSolver.

algorithm
SciPy’s nonlinear package contained several algorithms for solving a set of nonlinear equations. Three of these methods were considered by their developers to be of good quality, so those three were implemented as part of the BroydenSolver. The variable algorithm is an Enum where the following values represent the algorithms that follow.
  • broyden2: Broyden’s second method – the same as broyden1 but updates the inverse Jacobian directly

  • broyden3: Broyden’s third method – the same as broyden2, but instead of directly computing the inverse Jacobian, it remembers how to construct it using vectors. When computing inv(J)*F, it uses those vectors to compute this product, thus avoiding the expensive NxN matrix multiplication.

  • excitingmixing: The excitingmixing algorithm. J=-1/alpha

    The default value for algorithm is "broyden2".

    self.driver.algorithm = "broyden2"
    
itmax

This parameter specifies the maximum number of iterations before BroydenSolver terminates. The default value is 10.

self.driver.itmax = 10
alpha

This parameter specifies the mixing coefficient for the algorithm. The mixing coefficient is a linear scale factor applied to the update of the parameters, so increasing it can lead to quicker convergence but can also lead to instability. The default value is 0.4. If you use the excitingmixing algorithm, you should try a lower value, such as 0.1.

self.driver.alpha = 0.1
tol

Convergence tolerance for the solution. Iteration ends when the constraint equation is satisfied within this tolerance. The default value is 0.00001.

self.driver.tol = 0.00001
alphamax

This parameter is only used for the excitingmixing algorithm where the mixing coefficient is adaptively adjusted. It specifies the maximum allowable mixing coefficient for adaptation. The default value is 1.0.

self.driver.alphamax = 1.0

(See the source documentation for more information on BroydenSolver.)

CaseIteratorDriver

(See the source documentation for more information on CaseIterDriver.)

Todo

Discuss the CaseIteratorDriver in more detail.

CONMINDriver

CONMIN is a Fortran program written as a subroutine to solve linear or nonlinear constrained optimization problems. The basic optimization algorithm is the Method of Feasible Directions. If analytic gradients of the objective or constraint functions are not available, this information is calculated by finite difference. While the program is intended primarily for efficient solution of constrained problems, unconstrained function minimization problems may also be solved. The conjugate direction method of Fletcher and Reeves is used for this purpose.

More information on CONMIN can be found in the CONMIN User’s Manual. (In the simple tutorial in the User Guide, CONMIN is used for an unconstrained and a constrained optimization.)

CONMIN has been included in the OpenMDAO standard library to provide users with a basic gradient-based optimization algorithm.

Basic Interface

The CONMIN code contains a number of different parameters and switches that are useful for controlling the optimization process. These can be subdivided into those parameters that will be used in a typical optimization problem and those that are more likely to be used by an expert user.

For the simplest possible unconstrained optimization problem, CONMIN just needs an objective function and one or more decision variables (parameters.) The basic interface conforms to OpenMDAO’s driver API, which is discussed in The Driver API, and covers how to assign design variables, constraints, and objectives.

The OpenMDAO CONMIN driver can be imported from openmdao.lib.drivers.api.

from openmdao.lib.drivers.api import CONMINdriver

Typically, CONMIN will be used as a driver in the top level assembly, though it also can be used in a subassembly as part of a nested driver scheme. Using the OpenMDAO script interface, a simple optimization problem can be set up as follows:

from openmdao.main.api import Assembly
from openmdao.lib.drivers.api import CONMINdriver

class EngineOptimization(Assembly):
    """ Top level assembly for optimizing a vehicle. """

    def __init__(self):
        """ Creates a new Assembly containing a DrivingSim and an optimizer"""

        super(EngineOptimization, self).__init__()

        # Create DrivingSim component instances
        self.add('driving_sim', DrivingSim())

        # Create CONMIN Optimizer instance
        self.add('driver', CONMINdriver())

        # add DrivingSim to workflow
        driver.workflow.add('driving_sim')

        # CONMIN Design Variables
        self.driver.add_parameter('driving_sim.spark_angle', low=-50. , high=10.)
        self.driver.add_parameter('driving_sim.bore', low=65. , high=100.)

        # CONMIN Objective = Maximize weighted sum of EPA city and highway fuel economy
        self.driver.add_objective('-(.93*driving_sim.EPA_city + 1.07*driving_sim.EPA_highway)')

This first section of code defines an assembly called EngineOptimization. This assembly contains a DrivingSim component and a CONMINdriver, both of which are created and added inside the __init__ function with add. The DrivingSim component is also added to the driver’s workflow. The objective function, design variables, constraints, and any CONMIN parameters are also assigned in the __init__ function. The specific syntax for all of these is discussed in The Driver API.

Controlling the Optimization

It is often necessary to control the convergence criteria for an optimization. The CONMIN driver allows control over both the number of iterations before termination as well as the convergence tolerance (both absolute and relative).

The maximum number of iterations is specified by setting the itmax parameter. The default value is 10.

self.driver.itmax = 30

The convergence tolerance is controlled with dabfun and delfun. Dabfun is the absolute change in the objective function to indicate convergence (i.e., if the objective function changes by less than dabfun, then the problem is converged). Similarly, delfun is the relative change of the objective function with respect to the value at the previous step. Note that delfun has a hard-wired minimum of 1e-10 in the Fortran code, and dabfun has a minimum of 0.0001.

self.driver.dabfun = .001
self.driver.delfun = .1

All of these convergence checks are always active during optimization. The tests are performed in the following sequence:

  1. Check number of iterations
  2. Check absolute change in objective
  3. Check relative change in objective
  4. Reduce constraint thickness for slow convergence

The number of successive iterations that the convergence tolerance should be checked before terminating the loop can also be specified with the itrm parameter, whose default value is 3.

self.driver.itrm = 3

CONMIN can calculate the gradient of both the objective functions and of the constraints using a finite difference approximation. This is the current default behavior of the OpenMDAO driver. The CONMIN code can also accept user-calculated gradients, but these are not yet supported in OpenMDAO. Two parameters control the step size used for numerically estimating the local gradient: fdch and fdchm. The fdchm parameter is the minimum absolute step size that the finite difference will use, and fdch is the step size relative to the design variable.

self.driver.fdch = .0001
self.driver.fdchm = .0001

Note

The default values of fdch and fdchm are set to 0.01. This may be too large for some problems and will manifest itself by converging to a value that is not the minimum. It is important to evaluate the scale of the objective function around the optimum so that these can be chosen well.

For certain problems, it is desirable to scale the inputs. Several scaling options are available, as summarized here:

Value Result
nscal < 0 User-defined scaling with the vector in scal
nscal = 0 No scaling of the design variables
nscal > 0 Scale the design variables every NSCAL iteration. Please see the CONMIN User’s Manual for additional notes about using this option.

The default setting is nscal=0 for no scaling of the design variables. The nscal parameter can be set to a negative number to turn on user-defined scaling. When this is enabled, the array of values in the vector scal is used to scale the design variables.

self.driver.scal = [10.0, 10.0, 10.0, 10.0]
self.driver.nscal = -1

There need to be as many scale values as there are design variables.

If your problem uses linear constraints, you can improve the efficiency of the optimization process by designating those that are linear functions of the design variables as follows:

map(self.driver.add_constraint, ['driving_sim.stroke < driving_sim.bore',
                           'driving_sim.stroke * driving_sim.bore > 1.0'])
self.driver.cons_is_linear = [1, 0]

Here, the first constraint is linear, and the second constraint is nonlinear. If cons_is_linear is not specified, then all the constraints are assumed to be nonlinear. Note that the original CONMIN parameter for this is ISC. If your constraint includes some framework output in the equation, then it is probably not a linear function of the design variables.

Finally, the iprint parameter can be used to display diagnostic messages inside of CONMIN. These messages are currently sent to the standard output.

self.driver.iprint = 0

Higher positive values of iprint turn on the display of more levels of output, as summarized below.

Value Result
iprint = 0 All output is suppressed
iprint = 1 Print initial and final function information
iprint = 2 Debug level 1: All of the above plus control parameters
iprint = 3 Debug level 2: All of the above plus all constraint values, number of active/violated constraints, direction vectors, move parameters, and miscellaneous information
iprint = 4 Complete debug: All of the above plus objective function gradients, active and violated constraint gradients, and miscellaneous information
iprint = 5 All of above plus each proposed design vector, objective and constraints during the one-dimensional search
iprint = 101 All of above plus a dump of the arguments passed to subroutine CONMIN

Advanced Options

The following options exercise some of the more advanced capabilities of CONMIN. The details given here briefly summarize the effects of these parameters; more information is available in the CONMIN User’s Manual.

icndir
Conjugate direction restart parameter. For an unconstrained problem (no side constraints either), Fletcher-Reeves conjugate direction method will be restarted with the steepest descent direction every ICNDIR iterations. If ICNDIR = 1, only the steepest descent will be used. Default value is the number of design variables + 1.
Constraint Thickness
CONMIN gives four parameters for controlling the thickness of constraints – ct, ctmin, ctl, and ctlmin. Using these parameters essentially puts a tolerance around a constraint surface. Note that ct is used for general constraints, and ctl is used only for linear constraints. A wide initial value of the constraint thickness is desirable for highly nonlinear problems so that when a constraint becomes active, it tends to remain active, thus reducing the zigzagging problem. The values of ct and ctl adapt as the problem converges, so the minima can be set with ctl and ctlmin.
theta
Mean value of the push-off factor in the method of feasible directions. A larger value of theta is desirable if the constraints are known to be highly nonlinear, and a smaller value may be used if all constraints are known to be nearly linear. The actual value of the push-off factor used in the program is a quadratic function of each constraint (G(J)), varying from 0.0 for G(J) = ct to 4.0*theta for G(J) = ABS(ct). A value of theta = 0.0 is used in the program for constraints which are identified by the user to be strictly linear. Theta is called a push-off factor because it pushes the design away from the active constraints into the feasible region. The default value is usually adequate. This is used only for constrained problems.
phi
Participation coefficient, used if a design is infeasible (i.e., one or more violated constraints). Phi is a measure of how hard the design will be “pushed” towards the feasible region and is, in effect, a penalty parameter. If in a given problem, a feasible solution cannot be obtained with the default value, phi should be increased, and the problem run again. If a feasible solution cannot be obtained with phi = 100, it is probable that no feasible solution exists. The default value of 5.0 is usually adequate. Phi is used only for constrained problems.
linobj
Set this to 1 if the objective function is known to be linear.

(See the source documentation for more information on CONMINdriver.)

NEWSUMTDriver

NEWSUMT is a Fortran subroutine for solving linear and nonlinear constrained or unconstrained function minimization problems. It has been included in the OpenMDAO standard library to provide users with a basic gradient-based optimization algorithm.

The minimization algorithm used in NEWSUMT is a sequence of unconstrained minimizations technique (SUMT) where the modified Newton’s method is used for unconstrained function minimizations.

If analytic gradients of the objective or constraint functions are not available, this information is calculated by finite difference.

NEWSUMT treats inequality constraints in a way that is especially well suited to engineering design applications.

More information on NEWSUMT can be found in the NEWSUMT Users Guide.

Basic Interface

The NEWSUMT code contains a number of different parameters and switches that are useful for controlling the optimization process. These can be subdivided into those parameters that will be used in a typical optimization problem and those that are more likely to be used by an expert user.

For the simplest possible unconstrained optimization problem, NEWSUMT just needs an objective function and one or more decision variables (parameters.) The basic interface conforms to OpenMDAO’s driver API, which is discussed in The Driver API. This document covers how to assign design variables, constraints, and objectives.

The OpenMDAO NEWSUMT driver can be imported from openmdao.lib.drivers.api.

from openmdao.lib.drivers.api import NEWSUMTdriver

Typically, NEWSUMT will be used as a driver in the top level assembly, though it can be also used in a subassembly as part of a nested driver scheme. Using the OpenMDAO script interface, a simple optimization problem can be set up as follows:

from openmdao.main.api import Assembly
from openmdao.lib.drivers.api import NEWSUMTdriver

class EngineOptimization(Assembly):
    """ Top level assembly for optimizing a vehicle. """

    def __init__(self):
        """ Creates a new Assembly containing a DrivingSim and an optimizer"""

        super(EngineOptimization, self).__init__()

        # Create DrivingSim component instances
        self.add('driving_sim', DrivingSim())

        # Create NEWSUMT Optimizer instance
        self.add('driver', NEWSUMTdriver())

        # add DrivingSim to workflow
        driver.workflow.add('driving_sim')

        # CONMIN Design Variables
        self.driver.add_parameter('driving_sim.spark_angle', low=-50. , high=10.)
        self.driver.add_parameter('driving_sim.bore', low=65. , high=100.)

        # CONMIN Objective = Maximize weighted sum of EPA city and highway fuel economy
        self.driver.add_objective('-(.93*driving_sim.EPA_city + 1.07*driving_sim.EPA_highway)')

This first section of code defines an assembly called EngineOptimization. This assembly contains a DrivingSim component and a NEWSUMTdriver, both of which are created and added inside the __init__ function with add. The DrivingSim component is also added to the driver’s workflow. The objective function, design variables, constraints, and any NEWSUMT parameters are also assigned in the __init__ function. The specific syntax for all of these is discussed in The Driver API.

Basic Parameters

This section contains the basic parameters for NEWSUMT. One of the most important parameters in NEWSUMT is ifd. It is a flag for finite difference gradient control. The following table gives the possible values for ifd.

IFD Value Descriptive Information
0 All gradients computed by user analysis program
> 0 Use default finite difference stepsize of 0.1
< 0 Use user defined finite difference stepsize. The array fdcv specifies these stepsizes.
1 Gradient of objective function computed by finite differences
2 Gradient of all constraints computed by finite differences
3 Gradient of nonlinear constraints computed by finite differences
4 Combination of 1 and 2
5 Combination of 1 and 3

NEWSUMT can calculate the gradient of both the objective functions and of the constraints using a finite difference approximation. This is the current default behavior of the OpenMDAO driver. The NEWSUMT code can also accept user-calculated gradients, but these are not yet supported in OpenMDAO. In NEWSUMT, the array fdcv defines the step size of the finite difference steps for each design variable.

self.driver.fdcv = [0.1,0.1]

Note

The default values of fdcv are set to 0.01. This may be too large for some problems and will manifest itself by converging to a value that is not the minimum. It is important to evaluate the scale of the objective function around the optimum so that these can be chosen well.

When using NEWSUMT, you should specify which constraints are linear. Use the integer array ilin to designate whether a constraint is linear. A value of 0 indicates that that constraint is non-linear, while a value of 1 indicates that that the constraint is linear.

map(self.driver.add_constraint, ['driving_sim.stroke < driving_sim.bore',
                           'driving_sim.stroke * driving_sim.bore > 1.0'])
self.driver.ilin_linear = [1, 0]

Similarly, NEWSUMT has a flag parameter to indicate whether the objective function is linear or nonlinear. Setting lobj to 1 indicates a linear objective function. Setting it to 0 indicates a nonlinear objective function.

self.driver.lobj = 0

The jprint parameter can be used to display diagnostic messages. These messages are currently sent to the standard output.

self.driver.jprint = 0

Higher positive values of jprint turn on the display of more levels of output, as summarized below.

Value Result
jprint = -1 All output is suppressed, including warnings
jprint = 0 Print initial and final designs only
jprint = 1 Print brief results of analysis for initial and final designs together with minimal intermediate information
jprint = 2 Detailed printing
jprint = 3 Debugging printing

Controlling the Optimization

NEWSUMT provides a variety of parameters to control the convergence criteria for an optimization.

The maximum number of iterations is specified by setting the itmax parameter. The default value is 10.

self.driver.itmax = 30

The convergence tolerance is controlled with six parameters. The following table summarizes these parameters.

Parameter Description Default
epsgsn Convergence criteria of the golden section algorithm used for the one-dimensional minimization 0.001
epsodm Convergence criteria of the unconstrained minimization 0.001
epsrsf Convergence criteria for the overall process 0.001
maxgsn Maximum allowable number of golden section iterations used for 1D minimization 20
maxodm Maximum allowable number of one-dimensional minimizations 6
maxrsf Maximum allowable number of unconstrained minimizations 15
self.driver.epsgsn = .000001
self.driver.maxgsn = 40

Advanced Options

There are additional options for advanced users. More information on these parameters can be found in the NEWSUMT Users Guide. (This doc is slow to load.)

Parameter Description Default
mflag Flag for penalty multiplier. If 0, initial value computed by NEWSUMT. If 1, initial value set by ra 15
ra Penalty multiplier. Required if mflag=1 1.0
racut Penalty multiplier decrease ratio. Required if mflag=1 0.1
ramin Lower bound of penalty multiplier. Required if mflag=1 1.0e-13
g0 Initial value of the transition parameter 0.1

(See the source documentation for more information on the NEWSUMTDriver.)

DOEdriver

The DOEdriver provides the capability to execute a DOE on a workflow. This Driver supports the IHasParameters interface. At execution time, the driver will use the list of parameters added to it by the user to create a specific DOE and then iteratively execute the DOE cases on the workflow.

The user can pick from any of the DOEgenerators provided in the standard library, or provide their own custom instance of a DOEgenerator. A DOEgenerator must be plugged into the DOEgenerator socket on the DOEdriver in order to operate.

from openmdao.main.api import Assembly
from openmdao.lib.drivers.api import DOEdriver
from openmdao.lib.doegenerators.api import FullFactorial

from openmdao.examples.expected_improvement.branin_component import BraninComponent

class Analysis(Assembly):
    def __init__(self,doc=None):
        super(Analysis,self).__init__()

        self.add('branin', BraninComponent())
        self.add('driver', DOEdriver())
        self.driver.workflow.add('branin')

        self.driver.add_parameter('branin.x')
        self.driver.add_parameter('branin.y')

        #use a full factorial DOE with 2 variables, and 3 levels
        #   for each variable
        self.driver.DOEgenerator = FullFactorial(num_levels=3)

The min and max metadata of the parameters are used to denote the range for each variable over which the DOE will span.

(See the source documentation for more information on DOEdriver.)

FixedPointIterator

The FixedPointIterator is a simple solver that can solve a single-input single-output problem using fixed point iteration. It provides a way to iterate on a single input to match an output. In other words, fixed point iteration can be used to solve the equation x = f(x). By extension, FixedPointIterator can be used to close a loop in the data flow. The algorithm is probably useful for some problems, so it is included here. However, it may require more functional evaluations than the BroydenSolver.

As an example, let’s implement a component that can be run iteratively to produce the square root of a number.

from openmdao.lib.datatypes.api import Float
from openmdao.main.api import Component

class Babylonian(Component):
    """ The Babylonians had a neat way of calculating square
    roots using Fixed Point Iteration"""

    x = Float(1.0, iotype="in", doc="Input is x")
    y = Float(iotype="out", doc="Output is y")

    def execute(self):
        """ Iterate to find the square root of 2, the Babylonian way:
        """

        x = self.x
        self.y = 0.5*(2.0/x + x)

An assembly with this component and the FixedPointIterator would look like this.

from openmdao.lib.drivers.api import FixedPointIterator
from openmdao.main.api import Assembly

class SolutionAssembly(Assembly):
    """ Solves for the root of MIMOSystem. """

    def __init__(self):
        """ Creates a new Assembly with this problem
        the answer should be 1.4142.....
        """

        super(SolutionAssembly, self).__init__()

        self.add('driver', FixedPointIterator())
        self.add('problem', Babylonian())

        self.driver.workflow.add('problem')

        # Set our independent and dependent
        self.driver.x_in = 'problem.x'
        self.driver.x_out = 'problem.y'

The x input and the F(x) output are specified as string expressions and assigned to x_in and x_out in the solver.

>>> top = SolutionAssembly()
>>> top.run()
>>> print top.problem.x
1.4142...

Two additional parameters control the FixedPointIterator. The parameter tolerance sets the convergence tolerance for the comparison between value of x_out at the current iteration and the previous iteration. The default value for tolerance is 0.00001. The parameter max_iteration specifies the number of iterations to run. The default value for max_iterations is 25.

A more useful example in which the FixedPointIterator is used to converge two coupled components is shown in Tutorial: MDAO Architectures.

(See the source documentation for more information on FixedPointIterator.)

Genetic

Genetic is a driver which performs optimization using a genetic algorithm based on Pyevolve. Genetic is a global optimizer and is ideal for optimizing problems with integer or discrete design variables because it is a non-derivative based optimization method.

Genetic can be used in any simulation by importing it from openmdao.lib.drivers.api:

from openmdao.lib.drivers.api import Genetic

Design Variables

IOtraits are added to Genetic and become optimization parameters. Genetic will vary the set of parameters to search for an optimum. Genetic supports three variable types: Float, Int, and Enum. These types can be used as parameters in any optimization.

You add design variables to Genetic using the add_parameter method.

from openmdao.main.api import Assembly,Component, set_as_top
from openmdao.lib.drivers.api import Genetic
from openmdao.lib.datatypes.api import Float,Int,Enum

class SomeComp(Component):
    """Arbitrary component with a few variables, but which does not really do
       any calculations
    """

    w = Float(0.0, low=-10, high=10, iotype="in")

    x = Float(0.0, low=0.0, high=100.0, iotype="in")
    y = Int(10, low=10, high=100, iotype="in")
    z = Enum([-10, -5, 0, 7], iotype="in")

class Simulation(Assembly):
    """Top Level Assembly used for simulation"""

    def __init__(self):
        """Adds the Genetic driver to the assembly"""

        super(Simulation,self).__init__()

        self.add('driver', Genetic())
        self.add('comp', SomeComp())

        # Driver process definition
        self.driver.workflow.add('comp')

        self.driver.add_parameter('comp.x')
        self.driver.add_parameter('comp.y')
        self.driver.add_parameter('comp.z')

top = Simulation()
set_as_top(top)

In the above example, three parameters were added to the optimizer. The optimizer figures out for itself what type of variable it is and behaves appropriately. In all three cases, since no low or high arguments were provided, the optimizer will use the values from the metadata provided in the variable deceleration.

For comp.x the optimizer will try floats between 0.0 and 100.0. For comp.y the optimizer will try integers between 10 and 100. For comp.z the optimizer will pick from the list of allowed values: [-10,-5,0,7].

You can override the low and high values from the metadata if you want the optimizer to use a different range instead of the default.

top.driver.add_parameter('comp.w', low=5.0, high=7.0)

Now, for comp.x the optimizer will only try values between 5.0 and 7.0. Note that low and high are applicable only to Float and Int variables. For Enum variables, low and high are not applicable.

Configuration

When setting the objective you can specify a single variable name or a more complex function, such as

top.driver.add_objective("comp.x")

or

top.driver.add_objective("2*comp.x + comp.y + 3*comp.z")

In the second example above, a more complex objective function was created where the overall objective was a weighted combination of comp.x, comp.y, and comp.z.

To set the optimizer to either minimize or maximize your objective, you set the opt_type variable of Genetic to "minimize" or "maximize.

top.driver.opt_type = "minimize"

You can control the size of the population in each generation and the maximum number of generations in your optimization with the population_size and generations variables.

top.driver.population_size = 80
top.driver.generations = 100

As you increase the population size, you are effectively adding diversity in to the gene pool of your optimization. A large population means that a larger number of individuals from a given generation will be chosen to provide genetic material for the next generation. So there is a better chance that weaker individuals will pass on their genes. This diversity helps to ensure that your optimization will find a true global optimum within the allowed design space. However, it also serves to slow down the optimization because of the increased number of function evaluations necessary for each generation.

Picking an appropriate value for the maximum number of generations will depend highly on the specifics of your problem. Setting this number too low will likely prevent the optimization from converging on a true optimum. Setting it too high will help you find the true optimum, but you may end up wasting the computation time on later generations where the optimum has been found.

You can further control the behavior of the genetic algorithm by setting the crossover_rate, mutation_rate, selection_method, and elitism variables. These settings will allow you to fine-tune the convergence of your optimization to achieve the desired result; however, for many optimizations the default values will work well and won’t need to be changed.

The crossover_rate controls the rate at which the crossover operator gets applied to the genome of a set of individuals who are reproducing. The allowed values are between 0.0 and 1.0. A higher rate will mean that more of the genes are swapped between parents. The result will be a more uniform population and better searching of the design space. If the rate is set too high, then it is likely that stronger individuals could be lost to churn.

top.driver.crossover_rate = 0.9

The mutation_rate controls how likely any particular gene is to experience a mutation. A low, but non-zero, mutation rate will help prevent stagnation in the gene pool by randomly moving the values of genes. If this rate is set too high, the algorithm basically degrades into a random search through the design space. The allowed values are between 0.0 and 1.0.

top.driver.mutation_rate = .02

In a pure genetic algorithm, it is possible that your best performing individual will not survive from one generation to the next due to competition, mutation, and crossover. If you want to ensure that the best individual survives intact from one generation to the next, then turn on the elitism flag for your optimization. This will ensure that the best individual is always copied to the next generation no matter what.

top.driver.elitism = True

A number of different commonly used selection algorithms are available. The default algorithm is the Roulette Wheel Algorithm, but Tournament Selection, Rank Selection, and Uniform Selection are also available. The selection_method variable allows you to select the algorithm; allowed values are: "roulette_wheel," "tournament," "rank," and "uniform".

top.driver.selection_method="rank"

(See the source documentation for more information on Genetic.)